cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1024
Views
0
Helpful
5
Replies

Problem Configuring Public Servers and PAT in ASDM

N3t W0rK3r
Participant
Participant

Hi,

I'm using ASDM v6.4 to configure an ASA5520 runing 8.2(5).  Trying to set up PAT using the Public Servers screen in ASDM, but there is no place for public and private service to be specified.  I only see a field for service.  Am I missing something?

Thanks in advance.

John

5 Replies 5

Jouni Forss
Mentor
Mentor

Hi,

Not the best person to advice on the ASDM side as I use 99% CLI on the ASA

But quickly checking the ASDM side on one of my ASAs seems to me that the section you are referring to should give the option to configure

  • Static NAT configuration
  • Define services allowed to that Static NAT IP address