Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm looking at deploying an AC upgrade to our clients, and already have it set up on the ASA using webdeploy, but I'm concerned I wont hit clients that dont use VPN regularly, but who are on the enterprise network.We use Umbrella and I was considerin...
We are planning to upgrade our AC clients, for the first time, by using the ASA headend (4.9.0195 webdeploy package) for Windows. Question is, can I specify that the new image only be used by a specific group-policy before making it available to ever...
We're troubleshooting an issue with our Internet performance. We are provisioned with a 1Gbps symmetrical link from our ISP and currently the ASR outside interface (gi0/0/0) shows around 30% utilization: INTERNET-ROUTER#sh int gi0/0/0GigabitEthernet...
We're troubleshooting an issue with our Internet performance. We are provisioned with a 1Gbps symmetrical link from our ISP and currently the ASR outside interface (gi0/0/0) shows around 30% utilization: INTERNET-ROUTER#sh int gi0/0/0GigabitEthernet...
One of our N7K's has stopped logging to logfile. When I checked /var/log is showed to be at 100%. So I cleared the file and soon after, it stops logging.We've had these 7Ks up and running for 4.3 years (v6.2(14)) and this just started happening rec...
Thanks anyway... I'm pretty confident now that a reboot will be required, so as long as we mention that in the communications to staff, we should be good. Cheers.
Hey Rob, thanks very much for the reply.Is a reboot not required even if the SBL module is a part of our AC configuration?We will evaluate the use the SCCM for this purpose as well, thanks.
Thanks Rob, that's what I suspected. Thank you for confirming.In your experience, does the webdeploy upgrade method ever fail? Does the upgrade process required local admin privs or anything special like that?And what about modules... will the webd...
OK... so the show debug command reveals the same thing on all 7Ks and all VDCs:IP QOS MGR Debug Level:Set to Minor(1)default for new sessions logging level: 3 Also, I noticed that the log:startupdebug and log:vdc_2/syslog_debugs have current date/tim...