06-22-2021 12:36 AM
Hi all!
After upgrading from 6.4.0 to 7.0.0 I am stuck with some pending deployment changes. When I try to deploy them I get the following error:
I have seen som other have similar error on an ASA based device, but this is FTD/FDM based. Any clues anyone?
Solved! Go to Solution.
06-23-2021 12:05 AM - edited 06-23-2021 12:05 AM
The above error happens when you try to enable ikev1 (udp 4500) but there is a connection on your FTD (pass through) with that port being used.
In order to fix it, we need to clear the connection and proceed with the deploy again.
Try following the workaround in this defect: https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvf82733
HTH
Regards,
Chakshu
Do rate helpful posts!
06-23-2021 12:05 AM - edited 06-23-2021 12:05 AM
The above error happens when you try to enable ikev1 (udp 4500) but there is a connection on your FTD (pass through) with that port being used.
In order to fix it, we need to clear the connection and proceed with the deploy again.
Try following the workaround in this defect: https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvf82733
HTH
Regards,
Chakshu
Do rate helpful posts!
06-23-2021 12:09 AM
Hello Chakshu!
Thanks for the workaround pointer. That did the trick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide