Hi
i'm working on a asa 2140 and am having trouble configuring etherchannel in asa mode on interfaces 1/13 & 1/14.
I enabled and configured the interfaces for 1gbps in fxos prior to setting up an etherchannel, & issued commit-buffer command. After i verified settings in fxos, i can see the interface speed also changed in asa mode. i'm good up to this point. here is where my confusion begins. I'll connect back to fxos and configure the etherchannel for ports 1/13 & 14 at 1gbps. However, when i connect to asa mode, interfaces 1/13 and 1/14 default back to 10000gbps, and i do not know how to setup to 1gbps. Please let me know what i'm doing wrong.
here is the link i'm using as a reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/fxos201/cli-config/b_CLI_ConfigGuide_FXOS_201/interface_management.html
Thanks in advance for your help
Best Regards,
Jorge