Is there any issue w/ the following configuration:object-group network obj_myinternal_ips network-object host 172.16.23.20 network-objecthost 172.16.23.100 object network obj_myexternal network-object host 192.168.23.200 nat (inside,outside) sour...
Hi, I tried to configure ECMP with traffic Zones on my ASA 5516-x through FMC's FlexConfig, and it seems not working. I finally did it: At first, I have created a Flex object (In FMC: Objects - Object Management - FlexConfig - FlexConfig Object): O...
Hi All, I'm after some advice on the attached setup and wondering about the ASA order of Operations here along with PBR/Encryption. I'm comfortable with the VPN itself and PBR etc. This is more to see if anyone has a better understanding of how the P...
Hi Team?We have a Cisco ASA 5516-X with FirePOWER Service and we plan to deploy the Firepower Threat Defense (FTD) Software (6.4).As this is a small appliance, we do not plan to use a FMC. We will use the called Firepower Device Manager (FDM) to mana...
Hello, There is a problem with FMC and Active Directory. Sometimes when synchronizing I get the following error:"xxx/xxx (xx%) User unrecognised", where x is a number. I believe that this is related to some complaints that the users suddenly get dis...
Hi allI have a problem with NAT on ASA. I am trying to translate the destination IP based on source range and source port.I am getting a log below.Failed to locate egress interface for TCP from OAM_MDS_EXT:169.254.0.1/52464 to 8.2.3.1/161 .Range 8.2....
Hello, I have found a previous question related to the same error I'm getting but no answer. I have rearranged the policy based on different new sections, different logic. I didn't changed the content of the sections, so basically the policy is the s...
Hi Tech guys,Could u suggest me a Firewpower firewall based on throughput if i have below Links from ISP. No of Firewall Appliances Required: 2 High availability: Primary and StandbyNo of ISP Links:1- 2 ISP Links for Internet (Each 1000MB Fixed)2- 2...
Anyone have any tips, tricks or strategies for backing up Firepower ?
I recently purchased a Cisco ASA-SSM-AIP-20-K9 AIP Security Advanced Services Module from eBay and installed it into my Cisco ASA5540 firewall. It is shown properly, using the "show inv" command. I just need help in figuring out how to install the ...
I am replacing my SonicWall with FMC(6.3.0.3)/FTD 2110's (6.2.3.13). And trying to configure a "transparent mode" interface. I am in Routed mode, 1/1 is my WAN (192.1.1.1/24), I'd like interface 1/8 to be in transparent mode DMZ, so I don't have to w...
Hi All,My company has purchased Firepower 2100 series firewall with ASA image 9.10.1. My query is related to CLI and GUI. Is it the CLI Commands and GUI steps/view will be same as normal ASA and manage by ASDM. Any help will be appreciated
Trying to determine how to properly configure FQDNs in access lists on an ASA5525 to always resolve for HTTPS from an internal network server VM application reaching out to them regardless of what ip address changes occur to each domain name over tim...
Hi All, We have a HA Failover pair of Firewalls at different Data centers - A link is there in between where they are forming HA. Somehow we have lost management access to those firewalls now. Can someone please advice how we can break the passwork ...
using FDM to configure the FTD, dont see any option where i can configure SNMP. do i need to use Flexconfig to configure snmp. I'm using data interface to manage the device. Management interface not in use.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 09-22-2026 04:13 PM | ||
| 08-25-2026 06:22 PM | ||
| 08-24-2026 12:26 AM | ||
| 08-20-2026 05:54 AM | ||
| 08-19-2026 07:59 AM |
| User | Count |
|---|---|
| 3 | |
| 2 | |
| 1 | |
| 1 | |
| 1 |
