10-09-2009 08:46 AM - edited 03-11-2019 09:24 AM
All,
I recently imported an ASA 5505 (code 8.2(1)) into Cisco Security Manager 3.3.0. When I try to deploy the config back, even if I make no changes, I get the following error(s) reported in the transcript:
Line# 2. (ERROR) Sent (Fri Oct 09 11:32:48 EDT 2009): no monitor-interface inside
Received (Fri Oct 09 11:32:48 EDT 2009): ERROR: Command requires failover license
Line# 3. (ERROR) Sent (Fri Oct 09 11:32:48 EDT 2009): no monitor-interface outside
Received (Fri Oct 09 11:32:48 EDT 2009): ERROR: Command requires failover license
I do understand why the command is failing; that's not the problem. The problem is that CSManager is sending this irrelevant and problematic command. I can't find a way to tell CSManager to not do this. (FlexConfig, for example, just lets you add more commands before or after the main config. You cannot tell it to *not* config something.)
I've been unable to find any mention of this on Cisco.com or in NetPro. Can anyone give me some advice?
Thanks,
Christopher Ursich
Solved! Go to Solution.
10-10-2009 03:54 AM
You are hitting a bug in csm 3.3, it's in the bug toolkit. I think there is a workaround, where you either enable monitor interfaces in the failover policy, to make csm not deploy those commands, as it thinks they are default enabled.
10-12-2009 04:05 AM
CSCta83590 CSM 3.3 'no monitor-interface' ASA base license deployment failure
The fix will *probably* be in SP1, but you should already be able to get a patch from TAC now.
10-10-2009 03:54 AM
You are hitting a bug in csm 3.3, it's in the bug toolkit. I think there is a workaround, where you either enable monitor interfaces in the failover policy, to make csm not deploy those commands, as it thinks they are default enabled.
10-12-2009 04:05 AM
CSCta83590 CSM 3.3 'no monitor-interface' ASA base license deployment failure
The fix will *probably* be in SP1, but you should already be able to get a patch from TAC now.
10-14-2009 08:24 AM
Thanks to both respondents. Next time I will think to check the bug list too.
10-15-2009 01:58 PM
testing (please ignore)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide