RAS VPN with L2L VPN

[Madhan Kumar]

Hi All,

I have a ras vpn for remote users and have site-site vpn for my branch offices . Here my requirement is if any user connetcted to ras vpn also be able to reach other branches via site-site vpn. My inside subnet is 192.168.1.0/24 and my branch is 192.168.2.1/24 and my ip pool for remote users are 172.16.21.1/24.  Anyone pls help me out to configure this.

Rgds

R.MADHAN

[mvsheik123]

Hi,

What is your head end RAS device? Based on your head end RAS device...

1. You need to create hairpin vpn config for remote user subnet to access BOs.

2. Make BO subnets added to 'Spilittunnel' list for remote access users.

3. On head end and  BO devices make sure the traffic to & from remote user subnet is not nat'd.

Check the below doc for hairpin config example:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805734ae.shtml

hth

MS