12-21-2011 05:15 AM - edited 03-11-2019 03:04 PM
Hi All,
I have installed ASA5505 in the network. Port forwarding has been done for one of the server in our LAN. Public users are able to access the server successfully. I am trying to access from inside using the same Public server IP, but unable to access it. Can I have this feature in ASA5505(I think it is loopback configuration). If so, may I know the configuration detail?
Thanks in Advance!!!!
12-21-2011 09:41 AM
Hello,
Is the server on the same interface than the client?
What kind of service does the server provides?
Regards,
Please rate helpful posts.
Julio
12-22-2011 04:43 AM
Hi,
Thanks for your reply!!!
The server is connected to one of the ports of switch in LAN.
The server is a ftp server.
12-22-2011 09:34 AM
Hello,
If the clients and the server ( ftp) are on the same subnet that would not be possible because the traffic will not reach the ASA, just the switch.
Regards,
Julio
12-22-2011 01:17 PM
Hi,
Are you trying to access the ftp server from inside clients using the public ip address or private ip address of the server?
Can you please post the show run from the ASA? Along with the ip address of the Server you are trying to reach?
Puneet
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide