12-01-2011 07:25 AM - edited 03-11-2019 02:58 PM
Ok so here is the scenario.
1) create 3 sub-interfaces on a physical interface.
2) create a VLAN and assign the same VLAN to sub-interfaces.
3) create 3 contexts and assign them to sub-interface.
Unfortunately I cannot assign the same VLAN to the 3 sub-interfaces as in step 2).
Therefore I am looking for an alernative solution.
Thanks, gordon
12-01-2011 11:02 AM
It would appear that your alternative solution would be to use another device, based on the information you have provided.
Sent from Cisco Technical Support iPad App
12-05-2011 01:41 AM
Ok I have some alternative solutions:
The most cost effective although not standard is to use the management interface and implement VLAN bridging to overcome the conflict in step 2.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide