05-12-2011 11:07 PM - edited 03-11-2019 01:32 PM
HI,
I have ASA 5505 firewall with base license.
I am using 10.91.40.0/24 IP series.
Below are the requirements that i need to configure
1. First 30 IP's need to have direct internet access.
2. All remaining IP traffic i need to send proxy server( Squid server).
Note that my ASA 5505 is in base license and also tell whether my ASA is support for this feature.
Regards,
MJR
05-12-2011 11:35 PM
You can direct a part of your web traffic to the Squid server via WCCP.
See below a configuration example:
https://supportforums.cisco.com/docs/DOC-12623
WCCP is supported on the base license. See below a configuration guide
http://www.cisco.com/en/US/docs/security/asa/asa83/configuration/guide/wccp.html
Don't forget to rate all posts that are helpful
08-01-2011 07:31 AM
Hey Janaradan,
Refer below guide to redirect http traffic from ASA 5505 to Squid.
http://www.vmwareandme.com/2013/10/guide-how-to-redirect-http-traffic-from_23.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide