Remote and Local subnet is the same when coming through VPN

[jkalyan]

When my client uses a remote VPN connection into the central office, his local subnet and central office is in the same IP address scheme. This causes an issue when he wants to connect to servers in the central office.

Is there a way out of this ??

[Marwan ALshawi]

u mean the problem with makeing ACL for nat exmption right ?

if this the case

subnet the network into more sosific subnet VLSM

for example lets say the internal network is 192.168.1.0/24

and the vpn users use 192.168.1-14

then u may consider the 192.168.1.0 255.255.25.240 is the vpn subnet and match for nat examption and the rst for the local network

just the idea

good luck

if helpful Rate