Remote site communication

[Pnun]

I have a host and two remote sites. The remotes have site-to-site VPNs to the host. The two remotes can communicate just fine to the host, however the remotes cannot communicate with each other. I do not want to establish a site-to-site between the two remotes. How do I configure the host site to enable the two remotes to communicate?

At the host site I have a PIX 515e and the remotes have 1760s.

Thanks

[mostiguy · Accepted solution]

you cannot. a pix will not do this. configure a site to site between the 1760s, or replace the pix with a IOS router or a 3000 series concentrator.

[Pnun]

Thanks mostiguy