Reset of ASA 5515x

[Support987]

We wish to clear configuration on the ASA without removing licences can this be achieved by using either of the following commands write erase or config factory-default command?

[Sheraz.Salim]

you can all do.

config t#clear configure all

[Support987]

We do not want to remove the licences, which command will remove previous configuration but not licences?

[Sheraz.Salim]

which license you talk about?

[Support987]

Licenses which were pre installed on the ASA specific to the customer requirements. 

[Support987]

We do not want to removes licences. Which command will remove previous configuration and not the licences on the ASA. 

[Abheesh Kumar]

Hi,
Write erase and reload will erase everything on the ASA not licences.

Hope This Helps
Abheesh

[Sheraz.Salim]

you can also you the command

clear configure all it wont delete the lic.

[Ilia Sanashvili]

Why don't you just "delete startup-config" and reboot the firewall. That will delete only config file and any license file that might be on flash will remain untouched.