cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

2314
Views
0
Helpful
8
Replies
Highlighted
Beginner

Reset of ASA 5515x

We wish to clear configuration on the ASA without removing licences can this be achieved by using either of the following commands write erase or config factory-default command?

8 REPLIES 8
Highlighted
VIP Advocate

you can all do.

 

config t#clear configure all

please do not forget to rate.
Highlighted

We do not want to remove the licences, which command will remove previous configuration but not licences?

Highlighted

which license you talk about?

please do not forget to rate.
Highlighted

Licenses which were pre installed on the ASA specific to the customer requirements. 

Highlighted

We do not want to removes licences. Which command will remove previous configuration and not the licences on the ASA. 

Highlighted
VIP Rising star

Hi,
Write erase and reload will erase everything on the ASA not licences.

Hope This Helps
Abheesh
Highlighted

you can also you the command

 

clear configure all it wont delete the lic.

please do not forget to rate.
Highlighted

Why don't you just "delete startup-config" and reboot the firewall. That will delete only config file and any license file that might be on flash will remain untouched.

Content for Community-Ad