11-21-2012 03:34 AM - edited 03-11-2019 05:26 PM
Hi,
I have a cisco ASA 5510.
I have a public Dns entry for a service thats say service.domain.com.
the DNS entry for this is the same IP that computers in one office access the internet on.
Computers can see the local IP of the server that runs this service (its on a DMZ) but when they ping service.domain.com or try to access the particualr service that runs on this server via the full DNS entry they cannot.
as a workaround when i need some pcs to access this service i modify the hosts file to use the local DMZ ip for the full DNS entry.
Changing local DNS is not an option as we have multiple sites that replicate DNS and in the other sites they can access the service via service.domain.com and this should be left intact.
thanks
Solved! Go to Solution.
11-21-2012 03:57 AM
Hi,
leverage DNS doctoring :http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807968d1.shtml
Regards.
Alain
Don't forget to rate helpful posts.
11-21-2012 03:57 AM
Hi,
leverage DNS doctoring :http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807968d1.shtml
Regards.
Alain
Don't forget to rate helpful posts.
11-26-2012 04:06 AM
Thanks for that.
that does appear to be correct answer but i dont think it will work for me as i am using PAT for specific ports
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide