03-24-2019 08:09 AM
Hi
I was wondering if someone could give me some assistance. I have been having some routing issues on the Cisco ASA. Firstly, this seemed to be an issue with inter-vlan routing which was causing some issues, and after some reading etc. I think that this is now resolved as I can route through the majority of the vlans. However during this process I appear to have lost accessing out on the internet. Where this was available before.
Setup
Cisco ASA WAN connection is to an internet service provider using PPPoE connection. This then goes to a Cisco 3750 POE switch which is layer two. Just vlan tagging and the Cisco ASA is doing all the routing.
For the sake of my sanity, could someone please take a look at the configurations and let me know where I am doing wrong?
Thanks a lot!
Solved! Go to Solution.
03-25-2019 01:13 AM
Deepak,
Thanks for the reply. I think I have now resolved this issue which was caused by the following line.
nat (any,any) source static local-networks local-networks
Removed this line and it appears to be working now.
Thanks
Ray
03-24-2019 10:40 PM
Hi,
I didn't find any configuration except MTU on WAN interface.
"mtu WAN 1492"
Please share details:
Share an output from the ASA: "Show route"
Regards,
Deepak Kumar
03-25-2019 01:13 AM
Deepak,
Thanks for the reply. I think I have now resolved this issue which was caused by the following line.
nat (any,any) source static local-networks local-networks
Removed this line and it appears to be working now.
Thanks
Ray
03-25-2019 02:29 AM
That's Good. I am happy to you had resolved the issue.
I didn't notice this NAT "nat (any,any) source static local-networks local-networks" configuration in the file.
Regards,
Deepak Kumar
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide