running script 300_os/070 setup partition.sh

[HonixTech]

Hello, 

I have been trying to update Cisco firepower from 6.2.3.16 to 6.4.0-113, it gets stuck at 22%  with this message Ext4 -fs with discard option and device does not support.

[211005 00:57:29:939] Starting script: 300_os/070_setup_partition.sh
Undoing any existing mounts
Command [chattr -R -i /Volume/6.4.0] failed (1)!
[chattr: No such file or directory while trying to stat /Volume/6.4.0]

Command [rm -rf /Volume/6.4.0] succeeded!
The active root partition is /dev/sda6
The new(upgraded) root partition will be /dev/sda5
The new root partition's temporary mount point is /new-root
Command [mkdir -m 755 -p /new-root] succeeded!

Does anyone have an idea how to bypass this?

[rhuysmans]

Hi,

you didn't mention if you were upgrading an FMC or FTD but I'm assuming that it was your FMC, as that needs to be done first. Is it a virtual FMC?

When upgrading beyond 6.2.3 it's recommended to upgrade the FMC's memory to 32GB, the minimum being 28GB.

I would also upgrade directly to 6.6.5, being the "Gold Star" suggested release by Cisco but if you need to use 6.4.0-113 and it still isn't getting past 22% with a memory upgrade to 32GB then I would raise a TAC case with Cisco. They'll be able to look at the logs etc and determine the problem directly.