servers ip address is binding with ASA mac address
i m facing a weird issue with ASA. i have a sharepoint server with ip address 192.168.8.68 and gateway is my ASA, this server is accessed from outside as well with natted ip, if i restart the server, the server ip address does not responds to any traffic from inside or outside. when i see in the switch 2960 with the sh arp command the ip address of the server is binding with asa mac address. once i tried to change the ip address and revert back to original ip address, the ip conflict message pop up.
i can clear arp on switch and get rid of this, but this is not the solution, kindly help me to resolve this issue
This article is intended to be a simple example of configuring AnyConnect relevant syslog messages to be sent from the ASA to a Syslog server. The syslog server in this example is Spunk but almost any syslog server should be do the job. The ...
NGFW Spring 2020 Releases
It’s official! FTD 6.6, ASA 9.14.1, and FXOS 2.8 have been released. We want to thank the hundreds of team members for the tens of thousands of man-hours dedicated to driving this critical release over the finish line. 120...
Hi,I was trying to 2fa cisco duo , all the required settings done as per below . The problem is duo cloud does nti not getting any request from the asa . So I am not getting any code from the duo https://www.youtube.com/watch?v=6nEvmc8wji...
This event continues the conversation of our recent Community Ask Me Anything event "Secure Remote Workers".
To participate in this event, please use the button to ask your questions
Here’s your ch...
User Experience Enhancements
As part of the Cisco Common User Experience program, we are working towards a more uniform user experience and terminology alignment. This program runs across all Cisco security products.
Early Access introduces a...