12-06-2017 11:39 AM - edited 02-21-2020 06:55 AM
Hello,
I am migrating from a faulty ASA 5555X to a replacement. I would like to swap the two from a remote location (no HA). The only caveat is that the faulty ASA has two mirrored 120GB SSD's and the replacement does not. FirePower is not running on either, nor is IPS. Do I need the SSD's for any reason?
Thank you in advance,
supercell
Solved! Go to Solution.
12-06-2017 11:30 PM
SSDs are required for use with the services modules, like Firepower or CX.
SSDs are not required for ASA platform to function.
12-06-2017 11:30 PM
SSDs are required for use with the services modules, like Firepower or CX.
SSDs are not required for ASA platform to function.
12-07-2017 04:49 AM
Bogdan is correct.
However I would suggest migrating the SSDs from the faulty ASA to the new one. That way you have them in place should you decide to use Firepower later.
12-07-2017 06:41 AM
Ok. Thank you.
If I have a production ASA 5555X and would like to add the two SSD's from a faulty ASA 5555X (no FirePower, no CX on the faulty ASA) could I physically migrate the two SSD's to the live production ASA without downtime/need to reboot?
Thank you,
supercell
12-07-2017 06:45 AM
They are hot-swappable (i.e. you can put them into a running ASA without downtime).
I don't believe they will be properly initialized until the ASA reloads and recognizes them via power on self-test (POST) as part of the inventory. However if you aren't using them with the service module feature then that's immaterial.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide