sizing issue ASA 5585-X

surajgovindan1 · ‎05-31-2011

Dear All,

Greetings!

I'm bit confused with part numbers. Can you please guide me in choosing the rt one.

my requirement is i need 2 no's of ASA 5585 with IPS SSP-20, and would like to configure it in HA mode.'

When i went through the part numbers i saw the below 2 and bit confused between these two.

1. ASA5585-S20X-K9 - This part number says description like below

a, ASA 5585-X Chas with SSP20,8GE,2SFP+,2GE Mgt,2 AC,3DES/AES

When i checked the 2nd part number which is below

2. ASA5585-S20P20SK9 and this says description as

ASA 5585-X w/ SSP20,IPS SSP-20,16GE,10K VPN PR,1 AC,3DES/AES

i can see that there are 16 GE ports and rest im not able to make out, especially after W/SSP20, they have written IPS SSP-20 what doest it mean.

and another part number

3. ASA5585-S20P20-K9

the above part number says

ASA 5585-X Chas w/SSP20,IPS SSP20,16GE,4GE Mgt,1 AC,3DES/AES

Can any one really explain the diff between these 3 products, this will really help me to analyze the details. Will rate all the suggestions.

Regards,

BS

Scott Nishimura · ‎05-31-2011

Hi Suraj,

The part numbers you are talking about are sales bundles.. Please check out this doc which towards the end, has a better description of each bundle. Those parts you are referring to is an IPS module and they also have licenses bundled in.

http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/product_data_sheet0900aecd802930c5.html

Also, if you have further questions on the bundles, you probably should contact our pre-sales line: 800-553-6387. They will have more information for you on the bundles.

regards,

scott