SLA Monitor for failover isp on ASA 5506

[Ryan Cresswell]

When you have a sla monitor configured for fail-over internet. If this was my config below assuming it was configured correctly elsewhere. Does it fail-over if 1 packet doesn't reach 8.8.8.8 or does it need all 6 packets to fail before it fails over?

sla monitor 123
type echo protocol ipIcmpEcho 8.8.8.8 interface outside
num-packets 6
frequency 180
sla monitor schedule 123 life forever start-time now

[Maykol Rojas]

Hello: 

num-packets number

no num-packets number

Syntax Description

number

The number of packets sent during an SLA operation. Valid values are from 1 to 100. Note When all the packets specified as the number argument (in this command) are lost, the tracked route has failed.

https://www.cisco.com/c/en/us/td/docs/security/asa/asa-command-reference/I-R/cmdref2/n.html#pgfId-1815481

Mike. 

[Ryan Cresswell]

Thanks