cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
771
Views
0
Helpful
4
Replies

Slow PIX 501 performance

iscs-mark
Level 1
Level 1

PIX 501 connected to a residential cable modem. Speedtests are giving me 3mbit down. When I plug a machine into the cable modem I am getting 10-12mbit.

Posting pertinent info:

interface ethernet0 auto

interface ethernet1 100full

nameif ethernet0 outside security0

nameif ethernet1 inside security100

pager lines 24

mtu outside 1500

mtu inside 1500

ip address outside dhcp setroute

ip address inside INSIDE_IP 255.0.0.0

ip audit info action alarm

ip audit attack action alarm

pdm logging informational 100

pdm history enable

arp timeout 14400

global (outside) 1 interface

nat (inside) 1 SUBNET1 255.255.255.240 0 0

nat (inside) 1 SUBNET2 255.255.255.240 0 0

nat (inside) 1 0.0.0.0 0.0.0.0 0 0

timeout xlate 0:05:00

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00

timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00

timeout sip-disconnect 0:02:00 sip-invite 0:03:00

timeout uauth 0:05:00 absolute

aaa-server TACACS+ protocol tacacs+

aaa-server TACACS+ max-failed-attempts 3

aaa-server TACACS+ deadtime 10

aaa-server RADIUS protocol radius

aaa-server RADIUS max-failed-attempts 3

aaa-server RADIUS deadtime 10

aaa-server LOCAL protocol local

aaa authentication ssh console LOCAL

http server enable

no snmp-server location

no snmp-server contact

snmp-server community public

no snmp-server enable traps

floodguard enable

telnet timeout 30

ssh 0.0.0.0 0.0.0.0 outside

ssh 10.93.44.0 255.255.255.0 inside

ssh timeout 60

console timeout 0

terminal width 80

4 Replies 4

andrew.prince
Level 10
Level 10

Ensure that the speed and duplex negotioated for the outside are correct, issue a "show interface e0" and see if you have any input/output errors.

HTH>

srue
Level 7
Level 7

remove these lines:

nat (inside) 1 SUBNET1 255.255.255.240 0 0

nat (inside) 1 SUBNET2 255.255.255.240 0 0

No error on the sh int command. I will remove those nat commands and see what happens.

No difference in speed with the NAT commands removed. :(

Review Cisco Networking for a $25 gift card