10-08-2012 04:36 AM - edited 03-11-2019 05:05 PM
Hi,
I forgot the community string (password) that configured for snmp.
When I ran the show run command, only asterisks were displayed instead.
Is there any way that I can display or retrieve it ?
Please help !!
Solved! Go to Solution.
10-08-2012 06:10 AM
hello Omer,
I belive you are using ASA8.3 or higher.. you can see the string as follows
more system:running-config
and come down to the snmp configuration part..
Hope this helps
Harish,
Please rate all helpful posts!
10-08-2012 04:55 AM
Hello Omer,
If I am not wrong, snmp string can not be encrypted, so was wondering how you were able to see only asteriks in th eoutput
regards
Harish.
10-08-2012 05:35 AM
Hi Harish,
It is an ASA 5520, and it shows:
snmp-server community *****
I'm not sure if there is something that I have to disable.
10-08-2012 05:46 AM
Hello Omer,
What is the version of ASA and snmp you are using ?
regards
Harish
10-08-2012 06:10 AM
hello Omer,
I belive you are using ASA8.3 or higher.. you can see the string as follows
more system:running-config
and come down to the snmp configuration part..
Hope this helps
Harish,
Please rate all helpful posts!
10-08-2012 09:42 PM
Thanks a lot Harish,
That worked for me
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: