cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
341
Views
0
Helpful
1
Replies

snmp issue

bma
Beginner
Beginner

Hi

PIX 6.3, setup snmp to get traffic from pix internal interface, but not traffic show up, following is configuration:

PIx internal intface ip: 192.168.250.1

SNMP server ip is 192.168.3.54 (in the dmz network)

static (inside,dmz) 192.168.250.0 192.168.250.0 netmask 255.255.255.255 0 0

access-list dmz_access_list permit udp host 192.168.3.54 host 192.168.250.1 eq snmp

access-list inside_access_list permit udp

host 192.168.250.1 host 192.168.3.54 eq snmp

access-group.....

No error in the log, access-list dmz_access_list got hit count, but on the snmp server, nothing shows up.

Please help.

Thanks

ben

1 Reply 1

bma
Beginner
Beginner

Hi

PIX 6.3, setup snmp to get traffic from pix internal interface, but not traffic show up, following is configuration:

PIx internal intface ip: 192.168.250.1

SNMP server ip is 192.168.3.54 (in the dmz network)

static (inside,dmz) 192.168.250.0 192.168.250.0 netmask 255.255.255.255 0 0

access-list dmz_access_list permit udp host 192.168.3.54 host 192.168.250.1 eq snmp

access-list inside_access_list permit udp

host 192.168.250.1 host 192.168.3.54 eq snmp

access-group.....

snmp-server host dmz 192.168.3.54

snmp-server community xxxxx

snmp-server enable traps snmp

No error in the log, access-list dmz_access_list got hit count, but on the snmp server, nothing shows up.

Please help.

Thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: