Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi We have PIX version 7.0. Netscaler in the dmz, and virtual server ip is the 192.168.8.98 (dmz network 192.168.8.0). inside web server is 192.168.0.250 setup with virtual server. If I setup a static (dmz,outside) 12.x.x.x 192.168.8.98 netmask 255....
Hi I get following message from PIX ver 7.0:PIX-1-106021: Deny TCP reverse path check from 192.168.0.150 to 192.168.0.250 on interface dmz106021: Someone is attempting to spoof an IP address on an inbound connection. Unicast Reverse Path Forwarding (...
Hi What is for static (inside dmz) 192.168.100.0 192.168.100.0 netmask 255.255.255.255 0 0? Is it no nat for the 192.168.100.0 network? If I remove this line, what is happen? Could I use following lines together static (inside dmz) 192.168.100.0...
Hi we are running netscaler between vlan140 and vlan150 and netscaler has vlan140 and 150 setup. Netscaler ip and vserver ip are in the vlan150, web server ip is in the vlan140.No problem with vserver ip to access web server. But when setup a vserve...
Hi PIX 6.3, setup snmp to get traffic from pix internal interface, but not traffic show up, following is configuration:PIx internal intface ip: 192.168.250.1SNMP server ip is 192.168.3.54 (in the dmz network)static (inside,dmz) 192.168.250.0 192.168...
Jon Do you have any idea about Netscaler virtual server ip and phiscal server ip can be on different subnet? My issue is virtual ip and phiscal server ip in different subnet.Thanksen
Hi JonFollowing is related lines in the static linesand show route:nat (inside) 1 192.168.0.0 255.255.255.0nat (dmz) 1 192.168.8.0 255.255.255.0global (outside) 1 interfacestatic (inside,dmz) 192.168.0.0 192.168.0.0 netmask 255.255.255.0C 192.168....
