06-11-2008 03:30 PM - edited 02-21-2020 02:03 AM
Is it possible to run split tunneling on an ASA ver 8.03 using the L2TP client??
I've got the client working just fine but can't seem to get split tunneling working even though I have it configures sam as for the Cisco Client..
Thank
Kerry
06-17-2008 06:30 AM
ASA supports split tunnelling.
Use this ASA/PIX: Allow Split Tunneling for VPN Clients on the ASA Configuration Example.
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml
04-21-2009 03:04 AM
I have the same problem with ASA. I'm using L2TP/IPSEC with windows Vista. I see that "Split tunneling is not available with L2TP on the PIX" and you can read this here: http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807213a7.shtml
And ASA OS is the same of PIX OS from 7.X
regards
gianrico
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide