05-21-2021 02:48 AM
how can I use ssh/telnet to connect another device from cisco ftd cli .is this command available on FTD CLI
Solved! Go to Solution.
05-21-2021 08:31 AM
To ssh (or telnet) from an FTD device requires using the management interface. The data plane interfaces are not available for those functions.
05-21-2021 02:54 AM
You can login to "expert" mode and use the ssh or telnet command.
05-21-2021 04:23 AM
Hi Rob
Thanks for your reply . I tried but from expert mode ii am unable to ping the devices connected to my inside zone. all request is by default going to management port which is not connected to any network. it says no route to the host (hosts are in inside zone).
05-21-2021 08:31 AM
To ssh (or telnet) from an FTD device requires using the management interface. The data plane interfaces are not available for those functions.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide