I have a vpn setup which is working on a Pix 535 firewall. I have more then 100 VPN accounts but my problem is that the vpn users are getting ip address from a common pool and i do not have control on the IP address. I want to configure the system in such a way that one a vpn id connect to the system should get the same ip address always which is defined by me so that i can implement the firewall policy on the basis of that ip . Presently i have to assign the policy on the vpn id groups...
With the enhancements in ISE 3.0 for integrating with Azure AD via SAML IdP, it is now possible to leverage Microsoft Single Sign-On for multiple ISE Portals (for example Sponsor and Guest/BYOD Portals).
At the time of this writing, ISE cann...
With the enhancements in ISE 3.0 for integrating with Azure AD via SAML IdP, it is now possible to create a BYOD Flow to provide Wireless network access using an employee’s Azure AD credentials.
The table below shows the whole Cisco Security solutions + Splunk integrations add-ons. Kindly let me know if I have missed some add-ons or if there are any new updates. Thank you!
Hope this will be helpful for everyone who is looking for Splunk in...
A python based script to generate report if there are disabled rules under an Access Control Policy and an option to delete those rules in bulk.
Step 1 Download the script on PCStep 2 Make sure python3 is installed on PC and have reach...
A python based script to generate report if there are double logging on FMC ACP (logging at beginning and end), having rule action "Allow" or "Trust". (Option1 )
Also, the logging at the begging will be disabled if logging is detected for both beginning ...