08-02-2012 04:33 AM - edited 03-11-2019 04:37 PM
Hello
I have a vpn setup which is working on a Pix 535 firewall. I have more then 100 VPN accounts but my problem is that the vpn users are getting ip address from a common pool and i do not have control on the IP address. I want to configure the system in such a way that one a vpn id connect to the system should get the same ip address always which is defined by me so that i can implement the firewall policy on the basis of that ip . Presently i have to assign the policy on the vpn id groups...
08-02-2012 09:19 PM
Hi,
I hope the below document helps.
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080a7afb2.shtml
Please do rate if the given information helps.
By
Karthik
08-02-2012 09:22 PM
Hi,
username cisco123 password ffIRPGpDSOJh9YLq encrypted username cisco123 attributes vpn-framed-ip-address 192.168.5.1 255.255.255.0
Please do rate if the given information helps.
By
Karthik
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide