Static Route for PIX 506e

[dbushue01]

This is the first Cisco router that I have tried to program, I am trying to setup a static route from an specific ip address from the public internet to access an IIS server on the inside network behind the firewall, the public address is 97.64.214.20 the inside address is 192.168.20.56. Thank you       

[Julio Carvajal]

Hello David,

Are you trying to allow access from an outside IP address to an internal web server?

Or are you trying to NAT that inside server to a public IP address..

Let me be more clear:

The internal IP address is 192.168.x.x... In order for anybody on the internet to access that server you must use a public IP address. Is 97.64.x.x going to be the Public IP address for that server?

For more information about Core and Security Networking follow my website at http://laguiadelnetworking.com

Any question contact me at jcarvaja@laguiadelnetworking.com

Cheers,

Julio Carvajal Segura