SYSLOG with TSL

[Tahir Piracha]

Hello,

there is a requirement to enable logs on TCP 6514 port with TLS. From some articles we found the command but those are not available in current version of IOS. 

Switch model is 2960-X and current IOS is 15.2, can any one confirm that the required feature is available in the same version or not?

[balaji.bandi]

Not that i am ware old IOS can support that feature, we can see new IOS XE code :

i was checking the configuration code not that i see can be possible, only you can have TCP and UDP ports

# logging host 10.10.10.10 ?
discriminator Specify a message discriminator identifier for this
logging session
filtered Enable filtered logging
sequence-num-session Include session sequence number tag in syslog message
session-id Specify syslog message session ID tagging
transport Specify the transport protocol (default=UDP)
vrf Set VRF option
xml Enable logging in XML
<cr>

https://www.cisco.com/c/en/us/td/docs/switches/lan/cisco_ie3010/software/release/15-2_2_e/configuration/guide/SwCfg/swlog.html