12-03-2013 07:24 AM - edited 03-11-2019 08:12 PM
Hello All
I need an answer please.
I wanted to give tcp conenction timeout as unlimited for some IPs coming through VPN.
So, I created an access-list defining the traffic for which I want this tcp timeout.
Then a class map, policy map, entered set timeout to '0'
Applied it under default service-policy, which is applied as global (by default).
My doubt is should I apply the service policy on the interface or the global will work.
Just a silly doubt
Thanks in advance.
Solved! Go to Solution.
12-03-2013 07:33 AM
Hi,
I think it should work just fine if you attach it to the default "policy-map" configuration that you have attached globally on the ASA.
You might want to configure the timeout value as something long rather than setting it as unlimited.
- Jouni
12-03-2013 07:33 AM
Hi,
I think it should work just fine if you attach it to the default "policy-map" configuration that you have attached globally on the ASA.
You might want to configure the timeout value as something long rather than setting it as unlimited.
- Jouni
12-03-2013 09:12 AM
Yes Jouni, its attached under the default policy-map. And as you have suggested, I have changed the timeout value to few hours.
Thank You again
Abhishek
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide