Timezone for Firepower Services Module

[fatalXerror]

Hi Guys,

I am configuring a Firepower service module using the ASDM and I am using FP 6.4 version. I noticed that I cannot change the timezone of my Firepower module using the ASDM as it is default in "New York". Do you have any workaround for this issue?

Thanks

[Marius Gunnerud]

You could try the following work-around.  I unfortunately do not have an ASA with firepower module to test on at the moment.

Workaround:
Change the System Policy->Time Synchronization setting to manual mode, deploy the new System Policy, then set the timezone in the Local->Configuration->Time settings. Then, go back to your System Policy and change back to NTP mode (you'll have to re-enter your NTP server info) and deploy the new System Policy.

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCuu10347/?rfs=iqvred

[fatalXerror]

Hi @Marius Gunnerud, I tried that multiple times already and I even tried to re-image the module but when I change the time to manual, I cannot see the change time-zone option which is a bit weird.

Have any idea?

Thanks

[Marius Gunnerud]

Have a look at the solution here, might be a possible solution.

https://www.petenetlive.com/KB/Article/0001363

[fatalXerror]

Hi @Marius Gunnerud , I tried this way as well but with no luck.