Tool for converting config on PIX.

[johnleeee]

Hi ,

I have two genereal questions about PIX.

1.) If it is possible download config to PIX for example from TFTP? If yes, how.!

I know that wr net save conf. to tftp.

2.) If over there is some configuration tool for converting conf. from 6.3.4 ver of PIXOS to 7.x PIXOS.?

BR

jl

[jackko]

1. command "configure net"

http://www.cisco.com/en/US/products/sw/secursw/ps2120/products_command_reference_chapter09186a00801727a6.html#wp1055799

The configure net command merges the current running configuration with a TFTP configuration stored at the IP address you specify and from the file you name. If you specify both the IP address and path name in the tftp-server command, you can specify server_ip :filename as simply a colon ( : ).

For example:

configure net :

2. not too sure if such tool exist.

[johnleeee]

Hi Jack,

thanks for answer..its useful for me you answered

me.

I will try it.

BR

jl