Unable proxy ping using CISCO-PING-MIB in MPLS VPN ?

[shaofei]

using CISCO-PING-MIB in MPLS VPN ?

In CISCO-PING-MIB.my document, wu can use the CISCO-PING-MIB to

Proxy ping the hosts in the MPLS VPN (vrf).

But when i do it, router will return the message:

errstat =12; errindex = 1(ciscoPingProtocol).

If Router isn't configed vrf, can proxy ping.

If set the error vrf name in snmp packet,

errstat=10; errindex=8(vrfname)

Do Cisco Support Proxy ping with vrf???

[m.singer]

I don't think proxy arp is supported when MPLS - VPN is enabled.

[shaofei]

no proxy arp.

Proxy ping using MIB-CISCO-PING.

[ddelchev]

It should work unless you are hitting a bug. Can you send me an example like:

configuration of the SNMP of the box. Configuration of the VRF. Configuration of the interface, and then some snmpset command at some unix station with the parameters you want to set.

[shaofei]

sorry, i don't use unix station, i program to send snmp messages.

parameters:

ciscoPingProtocol = 1(IP);

ciscoPingAddress =x.x.x.x;

ciscoPingPacketCount=

ciscoPingPacketSize=

ciscoPingPacketTimeout=

ciscoPingDelay=

ciscoPingEntryStatus=4;

ciscoPingVrfName="vpn1";

The parameters is right, because when i don't use ciscoPingVrfName, i can

ping the address.

But i set the ciscoPingVrfName="vpn1", the error is received.

thanks.

[shaofei]

My router's IOS version is 12.2.4T js.

[Gerrit Arends]

Hello,

I can ping via snmp into a vrf from the global configuration.

I use IOS 12.2.x and it works fine.

Cheers

Gerrit