Hi All,
I have re-image my ASA 5515-x with SSD to FTD 6.1.0. Following are my objective..
1) Access FTD locally through FDM
2) Point the FTD to FMC 6.1.0
Following are my observations
1) My ASA 5515-x which has FTD 6.1.0 image installed on it, is not getting ip address from DHCP server. I have checked with DHCP server settings but there is no issue with that as other devices are getting ip addresses.
I would like to know --
a) which interface should i configure through DHCP to get ip address, so that I can access the device via FDM and point it to FMC.
2) Re-image from ASA to FTD involves 2 major steps
a) Boot image (ftd-boot-9.6.1.0.cdisk)
b) System package file (ftd-6.1.0-330.pkg)
My 5515-x is getting an ip address through DHCP server without installing System package file(.pkg), but when i install .pkg file (i.e FTD image) ; my device is not getting any IP address neither through DHCP nor manually; due to which I am not able to access FDM and point the device to FMC.
Thanking in advance..
Regards,
Aditya