Unable to run ASDM

[abdulhadizamri]

Hello All,

Happy New Year 2017.

I just received a RMA for ASA 5505 Appliance with SW 10 Users 8 ports 3DES/AES.

The problem here is i unable to run https://192.168.1.1/admin on my IE and Firefox browser.

On IE shows  This page can’t be displayed Turn on TLS 1.0, TLS 1.1, and TLS 1.2 in Advanced settings and try connecting to https://192.168.1.1 again.

On Firefox shows 192.168.1.1 uses security technology that is outdated and vulnerable to attack. An attacker could easily reveal information which you thought to be safe.
Advanced info: SSL_ERROR_NO_CYPHER_OVERLAP
(Not secure) Try loading 192.168.1.1 using outdated security

Do i need to complete the Software License Transfer ?

Thanks.

[Marvin Rhoads]

Double check that your license on the new unit includes the 3DES-AES license. You can do this from a console port session by typing:

show activation-key | i 3DES

[abdulhadizamri]

Sorry Marvin,

The new unit receive is ASA 5505 Appliance with SW 10 Users 8 ports DES.

VPN-3DES-AES : Disabled

[Marvin Rhoads · Accepted solution]

You can add the license by following the procedure below:

Strong Crypto (3DES/AES) License

Q. How can I obtain strong-crypto licenses for my ASA?

A. ASA strong crypto (3DES / AES) keys are available at: http://www.cisco.com/go/license

1. Enter your CCO userid and password
2. Click the “Continue to Product License Activation” link.
3. Click Get Other Licenses > IPS, Crypto, Other…
4. Select Security Products > Cisco ASA 3DES/AES License, click Next
5. Enter ASA Serial number and click Next
   • If this is the first time you have applied for a strong crypto product, review and accept the terms of the license windows. You may need to return to http://www.cisco.com/go/license  and complete the steps above.
6. In the 3. Review and Submit window, click the I Agree with the terms of the License  check box, review your contact information, and click Submit
7. An email will be sent you with the ASA Activation key and instructions on how to apply the key

Source: https://supportforums.cisco.com/document/67701/asa-versions-image-names-and-licensing

[abdulhadizamri]

Thanks sir.

It is working.