Network Security

I have run into this issue many times with FirePower deployments.  Customers want to see what the interface utilization for each ASA/FTD device is at on the dash board.  Ive gone through all the widgets and while I found I can create what looks like ...

I have been wrestling with enabling tcp-bypass recently. We have assymetrical routing happening between two providers with BGP configured. I have tried configuring tcp-bypass on the inside interface, outside interface, and globally. Each time the PAT...

I'm working on some requirements to secure our devices. On the ASA, the SSL settings has SHA1 listed as the hashing.  Is there a license feature that updates it to SHA2 or greater?

I'm looking for the most recent Cisco audit files to use with ACAS.  Is there any available (after 2010) and if so, where to download them.  THANKS!

Please can anyone put me through on how to set number of login limitation to a linux server behind ASA Firewall. Will it be done on the server or Firewall?  How can i achieve that? Thanks

To manage 4110 firewall i must to have firesight ? even if i didnt buy any firepower lic ?

I installed the SFR module on the ASA and ran through all the configuration.  I registered it to my FirePower Management Center, however I failed to add the license to the SFR prior to doing that and the Management Center is not seeing my smart licen...

IPS report shows victim IP address on which the attack was launched, how is external attacker able to attack specific private IP addresses in a huge infrastructure?

I have a question regarding setting up a management interface on an ASA 5516-x firewall. If I dedicate an interface to a management network and then create a static route rule on this management interface, then will the destination address go back ou...

What is the different between End-point IPS and Network IPS?

I have a funny setup I am trying to finalize and struggling a bit. I need to setup a 5505 behind an ISP provided router. The 5505 then needs to make a L2L tunnel back to the corporate 5525. Once that tunnel is established I need to have a phone on t...

i am getting this message on my syslog please kindly help Asymmetric NAT rules matched for forward and reverse flows here is my config object network STORAGE host 10.178.12.46 object service netbios-ssn service tcp sourcce eq netbios-ssn nat (inside...