12-15-2022 07:13 AM
Hello,
i've installed two Firepower 1140 in ha running 6.6.5.2-14 version and they are managed via FDM.
I'm receiving this errors when trying to query them via SNMPv3:
%Received a report pdu from remote host: Unsupported SecurityLevel (SNMPv3)
the configuration seems ok (i've used flex config object which is the only method with fdm deploy), and can't understand what's causing the erros.
the same configuration on the old replaced asa worked fine...
do you have any tips?
Thank you
Solved! Go to Solution.
01-18-2023 07:20 AM
the configuration was ok, just a probe problem.
12-15-2022 08:46 AM
- Escalate to Cisco TAC .
M.
12-16-2022 03:50 AM
Hello,
If useful, following there are some shows, it seems all ok from my side:
17:10:44.701 OIRD-FW-1# show run all snmp-server
17:10:44.702 snmp-server group USER1 v3 auth
17:10:44.703 snmp-server user TIGER USER1 v3 engineID 80000009fea623ab7aaa81dsfsdfdsfsdfsdf9fffddaf8550 encrypted auth sha 9c:0a:f3:ff:59:85:47:bf:55:70:a7:55:db:8c:19:44:55:f9:54:28:80000009fea623ab7aaa8138195fc11625594f9fffddaf8550 encrypted auth md5 56:6b:a6:3f:01:bc:ae:86:ce:3b:53:a3:3e:cb:7a:08
17:10:44.704 snmp-server listen-port 161
17:10:44.704 snmp-server host inside 1.2.1.2 version 3 TIGER udp-port 162
17:10:44.704 snmp-server host inside 1.2.1.3 version 3 TIGER udp-port 162
17:14:50.836 OIRD-FW-1# show snmp-server statistics
17:14:50.836 227618 SNMP packets input
17:14:50.839 0 Bad SNMP version errors
17:14:50.839 0 Unknown community name
17:14:50.840 0 Illegal operation for community name supplied
17:14:50.840 0 Encoding errors
17:14:50.840 3186009 Number of requested variables
17:14:50.840 0 Number of altered variables
17:14:50.840 210623 Get-request PDUs
17:14:50.840 672 Get-next PDUs
17:14:50.840 0 Get-bulk PDUs
17:14:50.840 0 Set-request PDUs (Not supported)
17:14:50.840 228361 SNMP packets output
17:14:50.840 0 Too big errors (Maximum packet size 1500)
17:14:50.840 0 No such name errors
17:14:50.840 0 Bad values errors
17:14:50.849 0 General errors
17:14:50.871 227500 Response PDUs
17:14:50.873 861 Trap PDUs
if no further action are needed i'll proceed with a case.
thank you
Regards
01-18-2023 07:20 AM
the configuration was ok, just a probe problem.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide