Updating ADSM

[Andy White]

Hello,

I'm have upgraded our ASA 5510's from 7.0.8 to 8.4.3 and now I just need to do the ASDM, but get this error?  The bin file has been uploaded:

configure mode commands/options:

  disk0:/asa708-k8.bin    disk0:/asa843-k8.bin     disk0:/asdm-508.bin

  disk0:/asdm-647.bin     disk0:/crypto_archive

ciscoasa(config)# asdm image disk0:/asdm-647.bin

Device Manager image set, but not a valid image file disk0:/asdm-647.bin

What is the problem?

[ajay chauhan]

ASA 8.0(3)

ASDM 6.0(3) and later. Recommended: 6.4(7).

Image is Ok.

Did you change boot parameters?

show run boot

Thanks

Ajay

[mathieupoussin]

If you have done this before rebooting the ASA to the new firmware, this is normal, just reboot it and it should be fine

Sent from Cisco Technical Support iPhone App

[Marvin Rhoads]

Your command and directory filenames look OK.

Is your asdm-647.bin file size ~17,483 KB? If not, you might want to re-download asdm-647.bin from cisco.com and re-copy it onto disk0: (after deleting the current copy).