Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello.
I have a very weird issue with the DHCP client (Saw on 1941 and 2021 on IOS 15)
Every time I restart my router, to get new IP's from my ISP through DHCP, I need to do on the WAN interface the following :
ip dhcp client authentication m...
Hello.What do you use or recommend to use on your ASA ? I've used for a long time, Per-Interface ACL but now global ACL are available.But what are the advantages of having everything in one ACL ? What do you recommend ?Thank you.Best Regards,Mathieu ...
Hello,I just made a VPN on my ASA 5505 at home, I can connect successfully to it, but I can't contact anything in the network, nothing respond to ping or to anything else (include the ASA inside IP):192.168.3.0/24 is my internal network192.168.80.0/2...
Hello,I just got a refurbished ASA 5505.It works fine until un need to reload it or unplug it from power en replug it, when I do this and it's warm (even after some minutes of uses, so still physicaly cold while touching it), in this case, it simply ...
Hello,I have a little question, I'm studying MPLS using GNS3. I made a network with 4 MPLS routers, each connected to 2 others MPLS routers and one external non-MPLS router.I try to hide all the internal MPLS routing using the "no mpls ip propagate-t...
Yes, initially there is no configuration related to authentication, I need to enable the token authentication, wait for a DHCP request to fail, then disable it (So get the same configuration than initially) and then it works.I already have the forcer...
Use the packet-tracer command on the firewall, like this :packet-tracer input scr-inside tcp 192.168.3.67 9999 8.8.8.8 80(scr-inside = input interface) then source ip/port and destination ip/port
Hello,Peut tu nous afficher la configuration du failover sur les 2 ASAs ?Il nous faudrait aussi un "show failover" pendant que l'actif est actif et après la basculeAussi peut copier ici ce que tu a après avoir fait : term mondebug fover cabledebug fo...
