Hello, I am trying to upgrade from e3 to e4 and then upgrade my software...
here is a show version
Cisco Intrusion Prevention System, Version 6.2(2)E3
Host:
Realm Keys key1.0
Signature Definition:
Signature Update S479.0 2010-03-19
Virus Update V1.4 2007-03-02
OS Version: 2.4.30-IDS-smp-bigphys
Platform: ASA-SSM-10
Serial Number:
Licensed, expires:
Sensor up-time is 171 days.
Using 674635776 out of 1032499200 bytes of available memory (65% usage)
application-data is using 43.5M out of 166.8M bytes of available disk space (28% usage)
boot is using 40.1M out of 68.6M bytes of available disk space (62% usage)
MainApp E-ECLIPSE_2009_SEP_14_13_21_6_2_1_119 (Ipsbuild) 2009-09-14T13:22:32-0500 Running
AnalysisEngine E-ECLIPSE_2009_SEP_14_13_21_6_2_1_119 (Ipsbuild) 2009-09-14T13:22:32-0500 Running
CLI E-ECLIPSE_2009_SEP_14_13_21_6_2_1_119 (Ipsbuild) 2009-09-14T13:22:32-0500
Upgrade History:
* IPS-K9-6.2-2-E3 10:33:06 UTC Tue Sep 22 2009
IPS-sig-S479-req-E3.pkg 12:17:09 UTC Tue Jun 22 2010
Recovery Partition Version 1.1 - 6.2(2)E3
Host Certificate Valid from: 15-Jun-2010 to 15-Jun-2012
I understood that I can upgrade to IPS-engine-E4-req-7.0-2.pkg but when I try this from the asdm or from the cli, here is the output from the cli:
IPS-1(config)# upgrade ftp://N****@***.**.**.**//IPSengine-E4-req-7.0-2.pkg
Password: ********
The filename IPSengine-E4-req-7.0-2.pkg is not a valid upgrade file type.
Continue with upgrade? []: no
IPS-1(config)# upgrade ftp://N****@***.**.**.**//IPSengine-E4-req-6.2-2.pkg
Password: ********
The filename IPSengine-E4-req-6.2-2.pkg is not a valid upgrade file type.
Continue with upgrade? []: no
IPS-1(config)# end
do I want to just go ahead with the upgrade? even though it is telling me its not a valid upgrade type?
thanks for any help...
