Upgrade FMC/FTD

[ladmin]

We have a pair of 1150 firewalls running on a stand alone FMC. We're going to be upgrading the FMC first then the firewalls next. Looking at the upgrade path we can go directly from 7.0.4 to 7.2.4. Is that correct? I believe for the FMC we'll want to download and install 7.2.4.1-43 and for the FTD use 7.2.4.1-43. Is that correct or am I missing anything?

[Milos_Jovanovic · Accepted solution]

Hi @ladmin,

Yes, you must upgrade FMC first, and then FTDs.

Yes, you can jump from 7.0.4 to 7.2.4.

And yes, you can install 7.2.4.1 which is currently Cisco recommended release.

Kind regards,

Milos