cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2660
Views
0
Helpful
2
Replies

upgrade_startup_errors while upgrading IOS

mahesh18
Level 6
Level 6

Hi all,

I have upgraded the IOS on ASA 5505.

After doing upgrade i did sh flash

126  1189        Sep 28 2012 17:27:39  upgrade_startup_errors_201209282327.log

need to know what are these errors is my start up config changed ?

do i need to do something for startup config?

Thanks

Mahesh

1 Accepted Solution

Accepted Solutions

Jennifer Halim
Cisco Employee
Cisco Employee

I assume that you upgrade from 8.2 or lower version to 8.3 to higher version? That's why the error logs are getting generated as it is a major upgrade on the NAT and ACL feature.

Those are most probably just warning messages that you don't quite need to worry about.

You can view the logs from the ASA:

mor flash:/upgrade_startup_errors_201209282327.log

Here is the ASA migration documentation to version 8.3 or later for your reference:

http://www.cisco.com/en/US/docs/security/asa/asa83/upgrading/migrating.html

View solution in original post

2 Replies 2

Jennifer Halim
Cisco Employee
Cisco Employee

I assume that you upgrade from 8.2 or lower version to 8.3 to higher version? That's why the error logs are getting generated as it is a major upgrade on the NAT and ACL feature.

Those are most probably just warning messages that you don't quite need to worry about.

You can view the logs from the ASA:

mor flash:/upgrade_startup_errors_201209282327.log

Here is the ASA migration documentation to version 8.3 or later for your reference:

http://www.cisco.com/en/US/docs/security/asa/asa83/upgrading/migrating.html

Many thanks Jennifer.

Regards

MAhesh

Review Cisco Networking for a $25 gift card