- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
09-28-2012 04:45 PM - edited 03-11-2019 05:01 PM
Hi all,
I have upgraded the IOS on ASA 5505.
After doing upgrade i did sh flash
126 1189 Sep 28 2012 17:27:39 upgrade_startup_errors_201209282327.log
need to know what are these errors is my start up config changed ?
do i need to do something for startup config?
Thanks
Mahesh
Solved! Go to Solution.
- Labels:
-
NGFW Firewalls
Accepted Solutions

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
09-28-2012 06:33 PM
I assume that you upgrade from 8.2 or lower version to 8.3 to higher version? That's why the error logs are getting generated as it is a major upgrade on the NAT and ACL feature.
Those are most probably just warning messages that you don't quite need to worry about.
You can view the logs from the ASA:
mor flash:/upgrade_startup_errors_201209282327.log
Here is the ASA migration documentation to version 8.3 or later for your reference:
http://www.cisco.com/en/US/docs/security/asa/asa83/upgrading/migrating.html

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
09-28-2012 06:33 PM
I assume that you upgrade from 8.2 or lower version to 8.3 to higher version? That's why the error logs are getting generated as it is a major upgrade on the NAT and ACL feature.
Those are most probably just warning messages that you don't quite need to worry about.
You can view the logs from the ASA:
mor flash:/upgrade_startup_errors_201209282327.log
Here is the ASA migration documentation to version 8.3 or later for your reference:
http://www.cisco.com/en/US/docs/security/asa/asa83/upgrading/migrating.html
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
09-28-2012 07:58 PM
Many thanks Jennifer.
Regards
MAhesh
