Upgraded PIX from 6.3(4) to 7.0(4)

[jkeddington_2]

I just upgraded my PIX to the new 7.0.4 OS, and now for some reason I can not access the internet, but I can ping public addresses. Does anyone know what is going on???

[jackko]

have a look at this cisco doc, namely "pis/asa 7.0 issue: http clients cannot browse to some web sites":

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00804c8b9f.shtml

[jkeddington_2]

Thank you! That seems to have corrected my issue.. Now I just need to dig into this new command reference and get to know it..

[jackko]

it's good to learn that your issue has been resolved.

according to cisco,

Why should I rate posts?

If you see a post that you think deserves recognition, please take a moment to rate it.

You'll be helping yourself and others to quickly identify useful content -- as determined by members. And you'll be ensuring that people who generously share their expertise are properly acknowledged. As posts are rated, the value of those ratings are accumulated as "points" and summarized on the Member Profile page and on each member's Preferences page.

[jkeddington_2]

I agree with and tried to rate your post as 5 extremely helpful, since it was. But for some reason it does not show up.. Very puzzling..

[jackko]

thanks for trying.