Hi,
I would like to upgrade a HA pair of FPR2130 running ASA code 9.14. From the CLI I can see that
show fxos mode
Mode is currently set to appliance
What I don't understand is do I have to upgrade ASA code by adding the new ASA version with ASDM or do I have to upgrade the FXOS version.
From the CLI again:
fw# dir
Directory of disk0:/
537191550 drwx 4096 14:57:06 Mar 15 2022 .private
805731555 drwx 70 14:57:06 Mar 15 2022 log
351 -rw- 35741420 07:25:07 Apr 16 2021 asdm.bin
537191554 drwx 21 07:20:41 Jul 02 2021 smart-log
48103 drw- 25 07:20:45 Jul 02 2021 coredumpinfo
805306579 drwx 6 07:34:06 Jul 02 2021 fxos
268437282 -rwx 35744052 13:10:21 Aug 03 2021 asdm-7141-48.bin
48124 drw- 6 12:51:40 Aug 10 2021 tmp
2 drwx 4096 07:11:52 Jul 02 2021 cores
I can not see the running 9.14 asa code in the flash.
A show version is diplaying this
fw/pri/stby# sh ver
Cisco Adaptive Security Appliance Software Version 9.14(2)15
SSP Operating System Version 2.8(1.148)
Device Manager Version 7.14(1)
Compiled on Fri 16-Apr-21 05:24 GMT by builders
System image file is "disk0:/mnt/boot/installables/switch/fxos-k8-fp2k-npu.2.8.1.148.SPA"
Config file at boot was "startup-config"
Any help for this will be gratefull to perform the upgrade of this FW in 9.16.4
Kind regrds