Hi Shilpa,
Thk you. Hence can i confirm if the following steps are correct.
1)convert my pix configuration file using pixtoasa to a file name eg runconfig.cfg
2) Upload runconfig.cfg to my asa5510 disk0 filesystem using asdm
3)issue the command "copy disk0:/runconfig.cfg startup-config
4)use asdm or CLI to reload my asa5510, after reload my asa5510 should have the converted configuration from my pix firewall
In the link http://www.cisco.com/en/US/docs/security/asa/migration/guide/pix2asa.html#wp290854 in step5 under "using the GUI", for boot image path, can i just leave it empty or must i specify disk0:/ where all the files eg asa.bin and asdm.bin are stored.