04-07-2009 01:02 AM - edited 03-11-2019 08:15 AM
Dear all,
i need to upgrade software as in the subject.
i need the steps as well as configuartion file changes.
Thanks,
04-07-2009 02:20 AM
04-07-2009 03:54 AM
Upgrading from 6.1 to 6.3 wouldn't have any configuration changes.
1) Save the config to tftp server
pixfirewall# write net "ip add":pixconfig
2) Copy the bin file frm tftp to pix
pixfirewall#copy tftp flash
Address or name of remote host [127.0.0.1]? "IP add of tftp server"
Source file name [cdisk]? pix635.bin
3) reload the pix
pixfirewall#reload
if failover is configured on the box.
use #no failover
upgrade on pri, secondary unit
after upgrading on both units issue #failover
HTH
04-07-2009 04:04 AM
i need to know how to convert the configuration file :
for example,
conduit permit tcp host x.x.x.x eq www any
to be aplicable on 6.3(5)
04-07-2009 04:10 AM
04-08-2009 09:29 PM
ex:
where access list 101 is your outside access list.
access-list 101 permit tcp any host 62.192.84.90 eq www
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide