04-14-2009 01:40 PM - edited 03-11-2019 08:18 AM
Hi
I have a cisco pix 506E and i'm trying to upgrade to the new 7.0 software.But when i try to upgrade i get this message
Address or name of remote host [0.0.0.0]? 10.x.x.x
Source file name [cdisk]? pix708-6.bin
copying tftp://10.x.x.x/pix708-6.bin to flash:image
[yes|no|again]? yes
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Received 5548032 bytes
Erasing current image
Insufficient flash space available for this request:
Size info: request:5468216 current:2052152 delta:3416064 free:2883584
Image not installed
and when i do a sh flash i get this
(config)# sh flash
flash file system: version:3 magic:0x12345679
file 0: origin: 0 length:2052152
file 1: origin: 2097152 length:4329
file 2: origin: 0 length:0
file 3: origin: 2228224 length:3123604
file 4: origin: 0 length:0
file 5: origin: 8257536 length:308
so what i want to know is how do i delete all of this so that i can install the new Bin file,because there is no delete command in 6.3 and you can't use the squeeze command either
Solved! Go to Solution.
04-14-2009 02:56 PM
Unfortunately your platform does not support 7.x version, this version is intended for 515E or higher.
04-14-2009 02:56 PM
Unfortunately your platform does not support 7.x version, this version is intended for 515E or higher.
04-14-2009 03:19 PM
Thanks very much
04-15-2009 06:17 AM
while not supported, some people have successfully uploaded 7.x code to the 506e's. You have to first remove the PDM image though to make room for it. try google.
04-15-2009 06:29 AM
Thank you very much
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide